Lung Ventilation Systems & Accessories
Automatic Xenon Dispenser
The Automatic Xenon Dispenser is easily attached to the front
of the Pulmonex System without the use of tools. Preload the xenon vial into the supplied plunger. At the precise moment you want the xenon delivered to the patient, simply press the dispense button.
Xenon Trap Monitor
The Xenon Trap Monitor continuously monitors trap effluent during a xenon study, meeting compliance requirements in most states. An exhaust hose connects from the Pulmonex II exhaust port to the Xenon Trap Monitor’s intake port. Counting results are displayed with both audible and visual signals to indicate when the xenon trap exhaust port exceeds of 99 pCi/mL. The unit can also check background levels and perform a self-test for proper operation using a check source. A 10 μCi Cs-137 check source is required to calibrate the monitor.
Specifications:
Dimensions: 7″ l x 6″ w x 4″ h (17.8 x 15.2 x 10.2 cm) Lead Shielding: .5″ thick (1.3 cm)
Input: 22 mm Hose Adapter
Detector: Halogen Quenched GM Tube, 1.1 cm dia.,
2 mg/cm2 mica window
Voltage: 500 volts regulated
Buttons: On/Off, Next/Mute
Display: 4 Digit LED, 4 RGB Function LEDs (Self Test,
Background, Check Source or Count)
Readings: pCi/ml or counts
Speaker: Internal, beeps in alarm mode
Background Count Time: 1 minute
Power: 18 volts, UL approved, external; 115 VAC power adapter
Weight: 5.25 lb (11.55 kg)
Warranty: One year
Xenon Convenience KitsTM
Face Mask or Mouthpiece Kits – Your Choice, Your Convenience.
Air-Cushioned Face Mask Kits with clear ultra-flex expandable tubing from 6″ to 24″
Mouthpiece Kits with Direct Dose Administration adapter for leak-proof Xenon delivery
Xenon Convenience Kits bring together all the components needed to complete a single xenon study. Xenon can be administered via direct dose administration, that conveniently luer locks without the use of a needle;
or by injection port, which requires a syringe needle. Easy to use, simple to order and disposable, Xenon Convenience Kits are more than a bargain, they are a sensible and time-saving investment. In fact, our complete kits can prolong the life of your xenon charcoal traps by ensuring that the pre-filled Drierite cartridges arefresh for every scan while the pre-filled Soda-Lime (CO2 absorber) cartridges eliminate possible breakdown of granules that can lead to a clogged system and hinder patient air flow.
Xenon Convenience Kits Air-Cushioned Face Mask
Xenon Convenience Kits Air-Cushioned Face Mask with Injection Port
Xenon Convenience Kits Air-Cushioned Face Mask with Luer-Lock Injection Port
Xenon Convenience Kits Air-Cushioned Face Mask w/ Direct Dose Administration
Xenon Convenience Kits with Mouthpiece and Direct Dose Administration Adapter
Xenon Convenience Kits Air-Cushioned Face Mask and Direct Dose Administration Adapter
Air-Cushioned Face Mask
The air-cushioned face mask has a pre-filled air-cushion (medium inflation pressure) that molds to the contour of the patient’s face providing a tight, leak-proof and comfortable seal. Cushion pressure
is easily adjusted by inserting a standard syringe without needle in the two-way valve located on the mask bottom. The flexibility of cushion pressure allows optimum surface contact for every patient. Transparency of the entire mask allows continuous visual identification of patient’s vital signs.
Air-Cushioned Face Mask with Direct Dose Administration
In addition to the patient comfort provided by the soft, pliable air cushion of the disposable face mask, the direct dose feature reduces patient anxiety because no needle is used. The syringe luer locks tightly to the direct dose tube, away from the patient’s face. The one-way valve prevents the gas from reversing through the mask luer connector, allowing the technologist to disconnect immediately after injecting.
Air-Cushioned Face Mask with Injection Port
The air-cushioned face mask has a pre-filled air-cushion (medium inflation pressure) that molds to the contour of the patient’s face providing a tight, leak-proof and comfortable seal. Cushion pressure
is easily adjusted by inserting a standard syringe without needle in the two-way valve located on the mask bottom. The flexibility of cushion pressure allows optimum surface contact for every patient. Transparency of the entire mask allows continuous visual identification of the patient’s vital signs. The injection port is attached directly to the face mask and requires a syringe with a needle.
Face Mask Harness
This traditional Face Mask Harness is made of soft rubber and can be adjusted for any head size. The square rubber base is comfortably positioned on the back of the patient’s head and the harness tails are brought around to the front. The small holes provide a snug fit on the hook ring, holding the mask firmly in place.
Tru-Fit Disposable Mouthpiece
Contoured to the natural shape of the mouth, this mouthpiece can be held gently, but securely – eliminating the need to clamp down or the possibility of popping out of the patient’s mouth and interrupting the study. The soft plastic material is transparent so that any obstruction can be immediately detected by the technologist. Pleasantly scented with vanilla, this mouthpiece makes the procedure a little more comfortable for the patient.
Disposable Nose Clip
Economical, this nose clamp is all plastic for single patient use. Used with any mouthpiece.
Disposable Bacteria/Viral Filter
Bacteria filters are used to reduce the possibility of cross contamination. The single-use filter is placed in line between a delivery tube and disposable mouthpiece or face mask. Electrostatically charged filter media is 99.9% effective in bacteria/ virus retention while maintaining low breathing resistance. Two filters can be piggy-backed together for potential high- risk studies.
Corrugated Tubing
Corrugated Tubing is scored and capped at 6″ intervals for easy cutting and firm attachment to fittings.
Tubing Splice
Tubing Splice is used to connect sections of 22 mm corrugated tubing to individual mask and filter.
" Y " Connector
The “Y” Connector has a one-way valve and plug. It is used to connect two 22 mm tubes to a mouthpiece, face mask or bacteria filter.
Drierite
Moisture absorber – blue and white blend
Drierite serves as a moisture trap for the air going into the charcoal trap of the Pulmonex Xenon System. Drierite is blue and white when dry and turns pink when
it has absorbed maximum moisture. Available in two convenient sizes, Drierite is packaged in an air-tight container with a wide-access mouth.
Soda-Lime
CO2 absorber
Soda-Lime, a highly efficient CO2 absorber, prevents patients from re-breathing carbon dioxide and subsequent acidosis. Available in two convenient sizes, Soda-Lime is packaged in an air-tight container with a wide-access mouth.
Free-Breathing Pulmonex Hose Kit
The Free-Breathing Pulmonex Hose Kit features large bore tubing, which allows for minimal breathing resistance. This inexpensive, high quality, “free breathing” hose kit includes all required components and adapters.
The kit contains two 130-901 “Clean-Bore” hoses (36″ l x 1 1/8″ dia.), two 130-904 hose clamps, and a 130-902 non-rebreathing anesthesia valve (inlet and outlet 7/8″ O.D.), which permits the use of standard disposable bacteria filters and masks while providing unrestricted airway.
Xenon-133 Rebreathing Systems
A simple, safe and inexpensive method of administering Xenon-133 to perform perfusion steady state and wash out studies. Each kit comes as a complete disposable system, including a pre-filled Soda-Lime absorber cartridge and a 35-liter bag to ample volume for patient maintenance and collection
of expired Xenon-133. Made of a non-permeable plastic, the disposable system precludes xenon absorption or transfer through the device’s components. The system is designed to accept any xenon syringe/gun administration system. The entire rebreathing system is disposed of in accordance with NRC regulations.