Radiation Monitoring Equipment

GammaPRO®

Wireless Gamma Detection System

The GammaPRO System includes innovative and clinically relevant technical features that help to solve the toughest challenges of radioguided surgical procedures. With its modern design, high sensitivity, best-in-class detection, exceptional spatial resolution, dynamic response time, and intuitive software it can easily help to fulfill the needs in every clinical application for open and laparoscopic surgeries. The system is battery operated with a battery life of

15+ hours. It offers a full range of entirely wireless with a reliable Bluetooth connection and completely sterilizable probes that help to identify sentinel lymph nodes in a large majority of patients. It can detect up to 9 isotopes and measure 3 simultaneously. The system can be easily transportable in its lightweight briefcase.

Smaller Incision. Greater Confidence.

With multiple probe options available, the GammaPRO system’s rapid response time and minimal lag aids in identifying target nodes quickly and confidently in a broad range of anatomy. The slim and precise titanium tip can help to minimize the size of an incision keeping the outcome for the patient top of mind.

The Laparoscopic Probe can be used for clinical applications with superficial drainage like breast, melanoma, parathyroid, head and neck. The Angled Probe can be used for clinical applications with superficial drainage like breast, melanoma, parathyroid, head and neck. It allows ease of detection, as well as enhanced access and visibility in confined anatomical spaces for advanced lymphatic mapping. The Hi-Sense Probe can be used for head and neck procedures, providing greater precision in identifying targeted parathyroid adenomas. The Standard Probe can be used for clinical applications with deep drainage like prostate, lung, cervix, or endometrium. It can fit through a trocar and is the ideal choice for minimally invasive surgical procedures.

Specifications:

5230-0150 Standard Probe
• Total Length: 10″ (255 mm)
• Tip Diameter: 0.43″ (11 mm)
• Total Weight Including Battery: 0.35 lb (157 g)
• Spatial Resolution (FWHM) at 1 cm: ≤12 mm @ 140 keV (Tc-99) • Maximum Sensitivity: ≥ 23 cps/kBq @ 140 keV (Tc-99)

(850 cps/μCi)
• Sensitivity at 1 cm: ≥ 3.4 cps/kBq @ 140 keV (Tc-99) (125 cps/μCi)

5230-0151 Hi-Sense Probe
• Total Length: 10″ (255 mm)
• Tip Diameter: 0.61″ (15.5 mm)
• Total Weight Including Battery: 0.39 lb (177 g)
• Spatial Resolution (FWHM) at 1 cm: ≤20 mm (without col)

≤12 mm (with col)
• Maximum Sensitivity: ≥ 95 cps/kBq @ 140 keV (Tc-99)

(3500 cps/μCi)
• Sensitivity at 1 cm: ≥ 18.9 cps/kBq @ 140 keV (Tc-99)

(700 cps/μCi)

5230-0152 Laparoscopic Probe
• Total Length: 20″ (514 mm)
• Tip Diameter: 0.43″ (11 mm)
• Total Weight Including Battery: 0.39 lb (177 g)
• Spatial Resolution (FWHM) at 1 cm: ≤12 mm @ 140 keV (Tc-99) • Maximum Sensitivity: ≥ 23 cps/kBq @ 140 keV (Tc-99)

(850 cps/μCi)
• Sensitivity at 1 cm: ≥ 3.4 cps/kBq @ 140 keV (Tc-99) (125 cps/μCi)

5230-0153 Angled Probe
• Total Length: 10″ (259 mm)
• Tip Diameter: 0.43″ (11 mm)
• Total Weight Including Battery: 0.27 lb (122 g)
• Spatial Resolution (FWHM) at 1 cm: ≤6.5mm @ 140 keV (Tc-99) • Maximum Sensitivity: ≥ 37 cps/kBq @ 140 keV (Tc-99)

(850 cps/μCi)
• Sensitivity at 1 cm: ≥ 3.4 cps/kBq @ 140 keV (Tc-99) (125 cps/μCi) • Range of Isotope Energies Detected: 25 to 662 keV
• System Ingress Protection (IEC 60529): IP X7
• Tablet Ingress Protection: IP 54
• Voltage: 3.0 VDC single use Li Battery
• Maximum Current: 100 mA
• Maximum Power: 225 mW
• Grade of Protection Against Electrical Discharges: Equipment

supplied internally (Applicable part type B) • Lateral Shielding: 99.9% @ 122 keV (Co-57) • Max Probe Diameter: 1.6″ 40 mm

CAP - RADTM Smart Area Monitor

Network ready with mobile remote access

The CAP-RAD Smart Area Monitor is network ready, with a
large easy-to-read display. Designed for medical, industrial, and research facilities, the system can be accessed and controlled remotely by any PC or mobile device connected to your network through a web browser. Optional RAD-MON Monitoring Software is available for remote viewing and analysis. The program automatically monitors multiple units via network scan. Alarm states can also be communicated remotely through the networked software program, or via email directly to your
safety officer.

Features:

CAP-RAD Area Monitor

  • 8″ SVGA touch screen color display

  • Easy to follow menu-driven program

  • Large, bright, easy-to-read digital display

  • Bright color-coded bar graph display

  • Programmable units of measure (mR/hr or μSv/hr)

  • Low and high programmable alarm levels

  • Both visible and audible alarm states

  • Two hour battery life (non alarm state)

  • Data logging stored on area monitor readout

  • Setup menu available on touch screen

  • Email alert sent via SMTP protocol

  • Wall mount configuration

  • Ethernet interface

  • Three Dry Contact Relays

    RAD-MON Monitoring Software

    • Remotely controls and monitors the area monitor

    • Displays real-time data and alarm status

    • Stores data for all networked units

    • Simultaneously configures groups

    • Add new systems via network scan

    • Performs common statistical analysis

    • Windows-based program

       

      Specifications:

      CAP-RAD Area Monitor:

      • Detector: Energy compensated gas filled GM

      • Detector Operating Voltage: 500 V

      • Display: 8″ SVGA touch screen color display

      • Measurement Range: 0.1 mR/hr to 1,000 mR/hr; 1.0 μSv/hr to

        10 mSv/hr

      • Response Time: 1-3 s 90% FS

      • Battery Status: RED LED when battery voltage is LOW

        RAD-MON Monitoring Software:

      • Console Dimensions: 6.3″ h x 8.5″ w x 2.2″ d (16 x 21.6 x 5.7 cm)

      • Console Weight: 4 lb (1.8 kg)

      • Working Environment: 0 to 60° C, 0 to 90% humidity,

        non-condensing

      • Mount: Wall mount bracket

      • Power Requirements:

        Wall Mount Power Adaptor:
        Input: 100-240 VAC, 50/60 Hz
        Output: 5 VDC at 2 A
        Barrel Connector Plug: .078″ x 2.165″ x .472″ (0.2 x .55 x 1.2 cm) Or Ethernet (PoE): 48 VDC, 0.35 A

RDS-32TM Radiation Survey Meters

The RDS-32 Survey Meters are small handheld, battery operated radiation survey instruments. Due to its versatile functions and durability it is suited for a wide range of applications in civil defense, industrial use, nuclear power plants, laboratories, etc.

The meter features excellent ergonomics; lightweight and easy handling, with visual, audible, and vibration functions. Each meter includes an additional battery cover with belt clip to make it wearable, freeing the user’s hands to focus on their primary job.

With both Warning and Alarm levels users can know when they are approaching their limit without constantly monitoring their device and can act accordingly.

To extend the capabilities of the instrument, a wide variety of external Smart probes are available to meet user needs with any RDS-32 version. GMP-12/GMP-25 probes, and the full CSPTM probe range can be connected to all RDS-32 versions with adequate cable. The selection includes probes for gamma and neutron dose rate and alpha and/or beta contamination with various detection areas and scaler counting.

Features:

  • H*(10) dose equivalent rate according to latest standards

  • External alpha, beta, gamma and neutron probes for direct

    connection

  • RDS-32WR for wider dose rate range

  • iTx versions for wireless monitoring

  • 4-way navigation keys, practical shortcuts

  • Intuitive user interface

  • Large graphic screen, configurable backlight

  • Automatic display rotation with tilt sensor

  • High impact durable case construction, IP67 immersion proof

  • Internal memory allows versatile histogram functions and

    the ability to manually store measurements

  • Configuration and firmware upgrade done through the

    CSW-32TM Software with USB cable-link

  • Complies with IEC 60846 standards, designed to meet

    ANSI 42.17A, 42.17C standards

    Specifications:

    • Case: high impact durable glass fiber reinforced polymer; Drop tested from 1 m height on concrete floor on each side

    • Ergonomic design, rubber grip around the case

    • Binder-702 series connector

    • Enclosure class IP67 (IEC 60529), including battery

      compartment

    • Dimensions: 116 x 72 x 32 mm (4.57 x 2.83 x 1.26 in)

    • Weight without batteries – with batteries

      RDS-32: 160 g – 210 g (0.35 lb – 0.46 lb) RDS-32iTx: 170 g – 220 g (0.37 lb – 0.49 lb) RDS-32WR: 195 g – 245 g (0.43 lb – 0.54 lb) RDS-32iTxWR: 205 g – 255 g (0.45 lb – 0.56 lb)

    • Wrist strap, battery covers with and without a belt clip

    • Power supply: Batteries 2 x AA/LR6, alkaline or NiMH

    • Operation time with fresh Alkaline batteries more than

      2 months 8 h use/24 h (600 h in background radiation,

      radios disabled, display backlight off, LED off)

    • Operation time with fully charged NiMH batteries more than

      1.5 month 8 h use/24 h with 2900 mAh capacity
      (in background radiation, radios disabled, display backlight off, LED off)

    • Contacts for external power and charging of NiMH battery

    • Alarm audio level 86 dBA at 30 cm

    • Operating temperature

      RDS-32/RDS-32iTx: -25 °C to +60 °C (-13 °F to 140 °F)

      RDS-32WR/RDS-32iTxWR: -25 °C to +50 °C (-13 °F to 122 °F)

    • Storage temperature -40 °C to +70 °C (-40 °F to 158 °F)

    • Relative humidity 10% to 95% at +35 °C (95 °F)

Screen Shot 2566-10-09 at 16.40.31
Screen Shot 2566-10-09 at 16.40.44
Screen Shot 2566-10-09 at 16.40.38

GMP-25TM Pancake Probe

The GMP-25 probe is intended for monitoring alpha, beta, gamma and X-ray radiation. The GMP-25 probe is used as an external detector with the RDS-31/iTx/iTxSD multi-purpose Radiation Survey Meters especially for surface contamination monitoring and source localization applications.

The GMP-25 probe is equipped with a Binder connector and connected to the mating bulk connector interface at the bottom of RDS-31TM family survey meters.

The GMP-25 unit is a “smart” probe, having an internal high voltage generator and non-volatile memory for calibration coefficients and probe identification data. Thus the probe can be connected “on the fly” without the need for switching off the meter, which automatically recognizes the probe type and sets the meter reading to defined measuring unit.

Features:

  • Remote pulse rate measurements for alpha/beta/gamma surface contamination measurements

  • Converts the meter into contamination monitor

  • Sensitive for low levels of alpha, beta and gamma radiation

  • For general contamination and frisking applications

  • Cord lengths up to 15 meters upon request

  • RF-immunity: Fulfills following standards: IEC 61000-4-2 (2008), IEC 61000-4-3 (2006 +A1:2007 + A2:2010),
    IEC 61000-4-6 (2013), IEC 61000-4-8 (2009)

  • RF Emissions: Fulfills following standards: EN 55032B

  • FCC approval 2AHI8-RDS-32

  • IC Approval 26167-RDS32

  • IEC 60846-1 (all models), 60846-2 (WR models) compliant

  • USB-communication with suitable adapter

  • iTx versions: WRM radio 900 MHz or 2.4 GHz

  • Maximum possible emitting Tx power:

    298 mW at 900 MHz

    86 mW at 2.4 GHz

     

RDS-80TM Surface Contamination Meter

Allows for easy scanning of surfaces, objects and equipment

The RDS-80 Surface Contamination Meter is a versatile contamination detector which has been designed for a wide range of applications in different fields of radiation protection in the nuclear industry, rescue and other operations, involving a possibility for abnormal contamination levels.

The Digital, Handheld Pulse Rate Meter is suitable for personnel who need to locate and detect contaminated surfaces/objects during their work.

The functions comprise contamination measurements with alarm functions and automatic conversion to surface activity value and additionally surface contamination measurement with a possibility to store the histogram events in the meter ́s internal memory.

The use of configuration software (RDS-CSW) is required for downloading the data to a PC via IrDA port.

Features:

  • Wide measurement range: up to 100 000 cps or 1 000 000 Bq/cm2

  • Standard surface contamination measurements in cps or Bq/cm2

  • Contamination measurements with histogram function

  • Visual and audible alarms

  • Handy and easy-to-use design

  • Software for parameter setting, histogram readings and

    nuclide calibration complies with IEC 60325 standard

    Specifications:

  • Dimensions: 3.07″ x 4.96″ x 2.24″ (7.8 x 12.6 x 5.7 cm)

  • Weight:

    .6172 lb (.28 kg) without batteries

    .7275 lb (.33 kg) with batteries

  • Case: Rugged plastic case

  • GM Tube: 1.74″ dia. (4.4 cm)

  • Power Supply: 2 alkaline batteries IEC LR6/AA size

    (recommended)

  • Battery Life Time: At least 2000 hours at normal background

    with alkaline cells (more than 1 year under normal operation)

  • Battery Alarm: Two-step alarm for low battery voltage

    Characteristics:

  • Radiation Detected: Alpha >2 MeV, beta Emax >100 keV,

    gamma and X-rays from 5 keV to 3 MeV

  • Detector: End window GM tube, 1.5-2 mg/cm2

  • MICA Window: Active surface area 15.2 cm2

  • Measurement Range: Surface contamination 1 to 100 000 cps or 0.01 to 1 000 000 Bq/cm2

  • Alarm levels: Freely adjustable alarm levels for contamination level

  • Cps linearity: ±15% ±1 digit over the range. The Bq/cm2 display is calculated from cps values using isotope dependent coefficients

  • Display: Either cps or Bq/cm2

  • Surface Activity: (Bq/cm2) display configurable for different isotopes

  • Cps Rate: Follow-up by audible signal with frequency proportional to activity

  • Visual and Audible Alarm: User settable for surface activity
  • Histogram Capability: Up to 480 points with user settable logging interval
  • Backlit Display: Six large digits
  • Built-in Self-diagnostics Function
  • Gamma Background: Reduction for Bq/cm2 measurements
  • Built-in Infrared port (IrDA)